0
What else can I help you with?
Is a 1997 Chevy cavalier 2.2L a non interference engine?
NO it is an interference motor 180,000 broke timing chain, bent #3 exhaust valve, luckily it must have stopped quickly as no more were bent.
Is a 2.0 2003 suzuki engine a non interference motor it is in a Chevy tracker it has two timing chains the upper chain broke wondering if it bent or broke any valves?
it did in mine it bent 2 valves and i end it up replacing the head on it
Can a broken timing chain on a 1991 Pontiac grand am cause a bent valve?
YES IT CAN BEND A VALVE WHEN THE TIMING CHAIN BROKE VALVE TRAIN NOT MOVING AND THE CRANK IS STILL MOVING CAUSING PISTON TO COME IN CONTACK WITH THE VALVE THAT WAS OPEN
If the timing chain broke on a 1998 Jeep Cherokee 2.5 liter 4 cylinder and the car stopped immediately what are the chances the valves are bent?
verry high
What is the proper way to time 2.7 ltr Dodge engine?
If the timing chain broke, the proper method involves pulling the old motor and replacing it with a working one. the 2.7 is an interference engine and it will have either bent valves or holes in the pistons if the chain broke.
What if your motor is binding up after you put a new timing chain on half turn?
If you have installed a timing chain and the engine will only turn a half a turn, you are out of time and may have bent valves.If you have installed a timing chain and the engine will only turn a half a turn, you are out of time and may have bent valves.
If the timing chain is off on my 2002 Dodge Intrepid will that stop it from cranking up?
If the timing chain is off, you will probably have bent valves.
If the timing chain broke on a 97 Chevy S-10 4 cylinder how do you know if the valve has bent and what does it cost to replace the timing chain?
I'm having that done now(98 S10). $380 to replace the chain. If they have to pull the oil pan to remove broken pieces, it will be $805. When they get it back together, they will do a compression test to see if any valves are bent. Don't know what it will cost to fix that.
Will the valves be bent if timing chain breaks on dodge 3.9?
Normally no.
Can a 1996 2.2 s10 broke a timing chain can it be fixed or is the head bad?
I have a 97 chevy s10 and my timing chain broke and bent every valve too so yeah u will need to get ur head fixed or buy a new or used one but if u buy a used one get it pressure tested before u put it on
How do you replace the timing chain on a 1998 Chevy Malibu 2.4L 4 cylinder?
You have to jack the motor up and remove the motor mount on the side of the motor and remove the timing chain cover wich is held on by seventeen 10mm bolts. I will tell you the timing chain kit will run you around 225.00 but if it has slipt or broke your gona have to have the head checked to see if you bent any valves
Can valves be bent on a 2000 dodge intrepid with a 2.7L dohc v6 when the timing belt breaks?
There is NO Timing belt...- has one primary and two secondary chains. If chain broke possible to bent one or more intake valves, if slips- all intake valves need to be replaced... Good luck. G.
