0
How do you open the hood on 1993 Oldsmobile 98 if the inside release cable is broke?
If the cable broke at the pull under the dash, and it is still sticking out of the casing, behind the pull, you should be able to grab the end of the cable with a pair of plyers and give it a yank to pull the cable and open the hood. If it broke somewhere between the pull, inside the car, and the latch, under the hood, best bet would be if you can see under the front of the car and reach up, you can release it that way, by pulling on the cable.
What else can I help you with?
Inside release for hood won't unlatch why?
the cable is either stretched or broke
How do you open the hood when the inside hood release is broken on a 1990 Oldsmobile Cutlass Supreme?
On my 1988 Cutlass Supreme the cable broke at the release point in the car. I was unable to see anything from the outside so in the passenger compartment I took the release handle apart and used a set up pliers to pull the cable and release the hood. There should be just on bolt holding the release in place, it may be covered by the carpet. If it can't be done from the inside you can also reach up from under the front bumper and find the cable where it attaches to the latch. Just pull the cable and the hood should release.
How can you open the hood on a 1993 Buick Skylark when the hood release cable has snapped?
if the cable broke at the handle inside the car there will be a black cable with steel cable inside cut the black cable back so you see the steel cable get a par of visegrip pliers and pole the steel cable til the hood opens.
Cable for the hood broke on Nissan altima 2005?
cable broke release latch for the hood can't open it
How do you open rear cargo doors with cable broke?
Take the inside panel off and pull up on the lower cable and down on the upper cable.
Your emergency cable broke and is holding your brake on how can you release it?
Fix the emergency brake
How do you open hood of ford ranger when release cable is broke?
grab the broken end of the cable with vice grips and pull it
How do you open the hood when the cable brakes on a 1997 Oldsmobile cutlass supreme. the cable broke loose at the latch?
i had the same problem. the hood release is controlled by a cable. what i had to do was take off the cover by the driver side seat,grab the cable with a pair of vise gripps and pull the wire in the cable with a pair of pliers. it sounds crude but that's the only way to get the hood up. by the way,i would take it somewhere to get the cable replaced.it's buried!!!!!
How do you fix the cable for the hatch release on a 92 Blazer S10?
It depends on where its broke at. Is the cable broken at the mechanical part or is it broken before that?
How do you open trunk when cable release is broken?
With a key or from the inside.
How do you open the hood on a 1992 Chevy caprice if the hood release cable broke?
This depends on where it snapped, but usally it breaks inside the car, where it connects to the latch release, anyway you have to fish for the cable itself thru your grille, use a wire hanger bent back at the end about a 1/2", hook the cable closest to the latch itself, attach the hanger to the wire, not the sheath, and pull
1992 buick century hood cable broke How do you open hood?
I had a similar problem. On mine, the cable broke right inside the car...right at the lever. There was still plenty of cable sticking out so I just grab it with pliers and pull. If yours is broken in any other place, it will need to be replaced.
