i have a Chevy S-10 1990 and the hood wont release, and the latch is broke. what should i do
The hood release is in the glove box.
where is my hood latch located on my 1999 Chevy silverado pickup
You can get your 1994 Chevy S 10 pickup truck hood latch unstuck by spraying a lubricant on the latching mechanism. You can also remove the hood latch retaining bolts to bypass the stock release cable.
The hood release lever is below the instrument panel, under the steering wheel, in front of the driver side door on the left. You need to release the hood latch to open the hood. The safety hood latch is in the middle of the hood opening.
Under the hood
Use a set of pliers to pull the cable even if the plastic latch is broken...
If you mean the cable that goes to your latch and its snapped or something easiest way to do it is basicly grab a hold of the cable and pull on it and of latch would.
in the glove box
If you remove the grill from the front of the truck you can then access the safety latch and hood release. My latch had rusted so I had to do this using a flat head screw driver and lifting the safety latch which allowed for the hood release to open.
To fix the hood release on a 1992 Plymouth Acclaim, first check if the cable is disconnected or broken. If the cable is intact, lubricate the mechanism to ensure it moves freely. If the release lever is broken, you may need to replace it. Accessing the hood latch from underneath the car may also help to manually release the hood if necessary.
yes it will, I've got a 1990 truck that had issues with the latch, i got a new onw out of a 1992 4runner, just keep the new one lubed up
The hood latch release for the 2014 Honda Pilot is located inside the vehicle, on the driver's side. You can find it beneath the dashboard, near the left side of the footwell, typically marked with a hood icon. Pulling the lever will release the hood latch, allowing you to open the hood. After that, you may need to find a secondary latch under the front of the hood to fully lift it.