To program the key for a 1998 Ford Expedition, insert the original key into the ignition and turn it to the "On" position without starting the engine. After about 5 seconds, turn the key back to the "Off" position and remove it. Repeat this process with the original key a total of 8 times, ending with the key in the "On" position. Then, insert the new key, turn it to "On," and wait for the security light to turn off, indicating successful programming.
The keys on the 1998 Ford Contour are NOT chipped
Yes, this can be done by a Ford dealer.
yes but if the key has a chip in it then you will have to go to a dealership for tehm to program you a new one.
Where do I find the key less entry code on a 2001 Ford Expedition?
put the key in the ignition switch. turn it off/on off/on until you hear the doors lock or unlock. then hit the lock button on the key(s) or transmitter(s).
Each 2001 Ford Expedition with key less entry has it's own factory code
Take the key to a ford dealership
Replace the lock cylinder
No.
You need to refer to the service manual to remove a 2000 Ford expedition XLTS key-less entry system.
I have a 2008 Expedition Eddie B. Using the manual and the information center button and key you can program the doors to unlock when you open your door or park. Its in the manual.
It was an available option.