How do you program your keyless remote for a 2000 Chevy Blazer?

Answer 1

Sit in the vehicle with the doors closed. Hold down unlock on door panel while turning key to run position then off then run then off again release door panel button and locks will cycle locked and unlucked then hold down the lock and unlock buttons on the remote until the locks cycle again if you have more than one remote do the same on the other remote also if you don't do right after the first remote it wont work once you have repeated this process on all desired remotes turn the ignition to the on then off position again that ends the programming mode and test your remotes. sometimes it takes a couple of tries good luck. This is how I programmed my remotes for my 2000 Chevy Blazer