look on the front of the knob towards the dash and you will see a small push in clip on the base of the knob, pull the clip out and the knob will come off. The metal clip is actually more toward the middle of the shift knob. Just use a small flat blade screw driver to slide behind it and it pops right out.
To remove the gear shift knob on the SLK 320, first pry the cover from the gear shift knob. Then, use a screwdriver to remove the screw in the center of the knob. This will then allow the knob to be removed.
Try twisting it and then get a manual for it. Try Chiltons or Haynes.
To remove the gear shift knob on the '03 Silverado, first pry off the cover that has the shift pattern on it. Then, remove the screw that is under that cover to remove the knob.
you have to take the plastic cover off. more then likely you'll have to cut it off (thats what i did), then underneath that there's a bolt you'll remove and the shift knob will come off.
How do you remove the gear shift knob on a 2000 Daewoo Lanos?
There is a small metal C clip on the front side of the knob. You can use a small flat head screwdriver to pry it off. Then twist and pull the knob right off. It takes some muscle.
First remove the shift knob pattern (it can be pried out with a small screw driver). Next remove the alignment pin with a pair of pliers. Then the shift knob can be unscrewed.
To remove the console shift knob on the AT 1993 Olds Achieva, first pry the cover from the top of the shift knob. Then, access the single screw inside the cover of the shift knob and turn it counter-clockwise to release the knob.
u take a pair of needle nose pliers and at the front of the knob near the bottom there is a pin that loks almost like a staple just pull it out and it will come off
To remove the shift knob on a 1995 Nissan Sentra 200SX SE-R, first, locate the small set screw on the side of the shift knob, which may require a small Allen wrench or screwdriver. Loosen or remove the screw to release the knob. Once the screw is loose, simply pull the shift knob straight off the shifter rod. If it's stuck, gently twist while pulling to help loosen it.
pull the shift boot down. loosen the jam nut under the shift knob then unscrew the shift knob.
pull out the u-shaped hook that holds it in. it faces the dash. you might have to put the gear into 1st or 2nd to have enought room.