0
# Remove the door panel
# Pull back the plastic liner from the top - rear corner to clear access to the area behind the door lock
# Work the lock a few times to identify the links that move and connect to an 'arm' extending downwards from the lock cylinder
# Now that you know what moves, look for plastic/nylon connector which holds the linkage to the arm - usually this connector lifts up off of the rod
# The lock cylinder is usually held in place by a thin, springy, u-shaped 'plate' inserted like a collar around the cylinder right at the metal wall of the door. There's a part of it sticking up and that's what you pry against to slide it out from around the cylinder. This is a good opportunity to lubricate all the moving lock parts inside the door.
See "Related Questions" below for more about removing the door panel
What else can I help you with?
How do you change the driver side power lock motor on a 1999 Mercury Sable Wagon?
If you remove door panel you should have access to unit
How can I remove a door handle with a lock?
To remove a door handle with a lock, you typically need to unscrew the screws on the plate of the handle, then remove the handle and lock mechanism from the door.
How do you remove door lock assy on the driver side of a mercedez Benz 190 E?
Remove the drivers side door panel of your Mercedes-Benz. Remove the door lock assembly retaining bolts. Remove the door lock linkage. The door lock assembly will come off.
Remove a rear door lock from a 97 Plymouth grand voyager?
Begin by removing the inside door panel on your 1997 Plymouth Grand Voyager. Remove the door lock linkage. Remove the door lock retaining bolts. The door lock will come out.
How can I remove a Kwikset deadbolt lock from a door?
To remove a Kwikset deadbolt lock from a door, you will need to unscrew the mounting screws on the interior side of the door, then pull the lock assembly out of the door.
How do you remove the door lock on 2000 dodge neon?
how to remove a door lock cylinder on 2000 dodge neon
How to Replace key door locks on a 2000 escalade?
Remove the inside door panel of your 2000 Cadillac Escalade. Remove the door lock linkage. Remove the door lock retaining bolts. Reverse the process to install your new key door lock.
How do you remove the lock in the cylinder on a 1986 Mazda B2000?
what lock cylinder?door or ignition? door is simple, remove inner door panel, unhook rods attached to lock cylinder, remove retaining clip
How do you remove door lock?
remove inner door panel for access to lock
How do you change the door lock on a 1999 vw jetta When I turn the key nothing happens. Are there any troubleshooting steps to take before replacing the whole lock assembly?
Remove the inside door panel. Remove the door lock linkage. Remove the door lock barrel retaining ring. Reverse the process to install the new door lock.
How can I remove a door lock?
To remove a door lock, you will typically need to unscrew the screws holding the lock in place on the door. Once the screws are removed, you can then carefully pull the lock out of the door. Be sure to follow any specific instructions provided by the lock manufacturer for proper removal.
Where is the door lock actuator on an 02 Chevy tralblazer?
You will have to remove the door panel. And it will be mounted over by the door lock on the inside of the door.
