To remove the wiper arm on a 1968 Fairlane, first ensure the wipers are in the "off" position. Then, use a small flathead screwdriver to carefully pry off the decorative cap covering the mounting nut. Once the cap is off, use a socket wrench to loosen and remove the nut securing the wiper arm to the shaft. Finally, gently pull the wiper arm off the shaft; if it's stuck, a wiper arm puller may be helpful to avoid damaging the arm or shaft.
Remove plastic cap. Remove nut. Pry up wiper arm.....
Remove the wiper arm retaining clip. The retaining clip will be just below the wiper arm connection. Hold the retaining clip in and the wiper arm will come off.
A wiper arm on a 2001 Honda Civic is screwed on. To remove it unscrew the mounting hardware and take off the wiper arm.
you just pick up the wiper arm
# Raise the rear wiper arm finish cap to expose the wiper arm nut. # Remove the rear wiper arm nut (1). # Lift the rear wiper arm assembly (2) away from the rear window and remove the wiper arm from the pivot shaft. The cap tilts up toward the arm
To remove the spring loaded wiper arm you have to first of all to unscrew the screws. After the screws have been removed, the spring loaded wiper arm can then be removed.
look at the half circle clip on the side of wiper arm. lift the wiper arm and pull the clip out as far as it goes the wiper arm should rest on the clip and now be "locked" up in the air . now you should be able to remove the wiper arm
You can remove the 2005 Ford Explorer rear wiper arm by removing the retaining clip. The retaining clip is just below the wiper arm connection.
To remove the wiper arm, first remove the wiper blade. After the blade is removed, lift the arm just slightly to clear the tab protruding from the side of the arm. Pull the tab out after it ckears the arm and then pull the arm off the hub.
You don't have to remove wiper arm. The wiper blade will slide out, It has a clicker in the center of the blade that you have to slide it out. Look at it very carefully
To remove the wiper arm on a 1996 Mitsubishi Mighty Max, first ensure the wipers are in the "off" position. Then, locate the small plastic cover at the base of the wiper arm and gently pry it off to expose the mounting nut. Use a socket wrench to remove the nut, and then carefully wiggle and pull the wiper arm straight off the wiper motor shaft. If the arm is stuck, a wiper arm puller tool can help safely remove it without damaging the arm or the shaft.
To remove a wiper arm on a 1964 Mustang, first, lift the wiper arm away from the windshield to access the base. Look for a small retaining clip or nut at the base of the wiper arm that secures it to the wiper motor spindle; use a socket or wrench to remove it. If there's a clip, gently pry it off, then pull the wiper arm straight off the spindle. Be careful not to bend the arm or damage the glass while doing this.