The 2001-2005 Honda Civic (all except SI) takes 21" driver side and 19" passenger side replacement windshield wiper blades. The 2002-2005 Honda Civic SI takes 24" driver side and 16" passenger side replacement windshield wiper blades.
Its attached to the windshield wiper motor you will have to remove the cowl to get access to it.
The 2001-2005 Honda Civic (all except SI) takes 21" driver side and 19" passenger side replacement windshield wiper blades. The 2002-2005 Honda Civic SI takes 24" driver side and 16" passenger side replacement windshield wiper blades. See resources and related links for more information.
On a 2001 Chevrolet 1500, the wiper motor is located under the windshield cowl, near the base of the windshield on the driver's side. To access it, you may need to remove the cowl cover and possibly the windshield wiper arms. The motor is mounted to the firewall and is typically connected to the wiper linkage.
The windshield wiper SWITCH ? It's on the turn signal lever
On a 2001 Mercury Grand Marquis, the wiper motor is located under the windshield cowl, near the base of the windshield. To access it, you'll need to remove the plastic cover that runs along the bottom of the windshield. The motor is typically mounted to the vehicle's firewall and connected to the wiper linkage.
The windshield wiper relay is located in the electrical power distribution center.
To remove the wiper blade on a 2001 Saturn L200, first lift the wiper arm away from the windshield. Locate the small tab or lever where the wiper blade connects to the arm, press or pull it to release the blade. Slide the blade off the wiper arm, and then simply attach the new blade by sliding it onto the arm until it clicks into place. Lower the wiper arm back onto the windshield once the new blade is secured.
It is attached to the wiper motor.
To replace the linkage on the driver's side windshield wiper of a 2001 Ford Explorer XL, first, lift the wiper arm away from the windshield and remove the nut securing the wiper to the linkage using a socket wrench. Next, detach the wiper arm and remove the plastic cover from the base of the wiper assembly to access the linkage. Disconnect the linkage from the motor and the other components, then install the new linkage by reversing the process: connect it to the motor, secure it, and reattach the wiper arm and cover. Finally, test the wipers to ensure proper operation.
How do you remove the wiper arms on 2001 Lincoln LS
theres a clip. unclip it. use a small screwdriver to push the clip out and pull it out.