To remove the front seats in a 1990 Geo Tracker, first, slide the seat all the way forward to access the rear bolts. Use a socket wrench to remove the bolts securing the seat to the floor. After removing the rear bolts, slide the seat back to access and remove the front bolts. Finally, disconnect any electrical connectors, if applicable, and lift the seat out of the vehicle.
To remove the front seats from a 1990 Olds 98, first, slide the seat all the way forward to access the rear mounting bolts. Use a socket wrench to remove these bolts, then slide the seat backward to expose the front bolts and remove them as well. Disconnect any electrical connectors if the seats are powered, and carefully lift the seat out of the vehicle. Make sure to have someone assist you, as the seats can be heavy and cumbersome.
just in front of gas tank.
you have two seats in the front, and a bench seat in the back
In order to remove the headliner, your have to remove the seats or it will not fit out of the car.
left front speak, behind see my profile see link.
That would indicate that the alternator is not functioning.
This is very easy. The front seats all held in place by 4 bolt that go to the floor. Get a rachet with a 14 or 15mm head, not sure. position the seat all the way to the back, and you will see the front two bolts to remove. Once removed, slide the seat all the way to the front, and start removing the rear bolts. easy as that good luck
Unscrew the bolts that hold them to the floor.
does 1990 geo tracker have air bags
A person can remove the front license plate cover on a 1990 Corvette with a screwdriver. The plate can then be replaced with a custom plate or a state plate if required.
Where can i buy a fuel pump relay for 1990 1.6 geo tracker
i want to know how to rebuild a manual transmission for a 1990 Geo Tracker 4x4