Remove the door panel. Remove the switch retainer. Remove the wiring harness. Reverse the process to install the new switch.
The 1994 Chevrolet Camaro power window relay switch can be found inside of the driver side door. You will need to remove the door panel to access the power window relay switch.
you can by pass the switch, get wiring diagram and figuare out wich wires are for window motor you need rolled up, then remove switch and put power to wire that will make motor roll window up
remove pwer window switch disconnect wires. using another wire, bridge the wires in swith to complete circuit window will go up
The 1997 Cadillac power window relay switch can be found inside of the drivers side door. You will need to remove the inside door panel in order to access the power window relay switch.
Remove switch panel and jump wires on switch- if this works bad switch Remove door panel and see if the motor is getting power-if it is getting power, bad motor
A power window relay switch relays the power from the car's battery, to the switch itself, and then to the window motor. When pressing the button inside of the car it allows the power to go from the relay switch to the motor and roll the window up or down.
check power going to the switch , and power coming out of the switch ,if no power check fuses and wiring for open or shorts , then remove door panel and bench test the motor basically put power to the window motor
remove switch from where it is mounted using a wire , bridge the connections.if switch is bad, it will work the motor while bridged
If you mean the extra switch on the drivers side power window control it cuts power to the passenger side window switch. Handy if you have kids.
Tell me if just one window or all of them quit working
remove the door panel then remove the switch which is secured at one closest to the front end by a Philips screw into a gold retainer