The cheapest way is to buy a drum assemble from a junk yard. $65.00 to $110.00
4 bolts hold it on plus brake line. and 4 nuts on e brake cable. 1.5 -2.5 hours labor
most times if brake lights are stuck on you have a bad brake light switch on pedal under dash
2005 Toyota tacoma how to remove the brake rotor
How do you remove the rear brake rotor on a 2005 Dodge Ram 2500?
How do i remove a stuck Cd from my 2005 Toyota Highlander? The CDs will not eject.
To remove the rear brake drum on a 2005 Suzuki XL7, first ensure the vehicle is securely lifted and supported on jack stands. Remove the wheel and tire, then locate the drum retaining screws, if present, and remove them. If the drum is stuck, gently tap around the edges with a hammer or use a brake drum puller to loosen it. Once free, slide the drum off the wheel hub, taking care not to damage the brake components inside.
To remove the front brake rotors on a 2005 Kia Spectra, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the front wheel and detach the caliper by unscrewing the caliper bolts; hang the caliper using a wire to avoid stressing the brake line. Next, remove the caliper bracket if necessary, and then take off the rotor, which may require tapping it gently if it's stuck. Finally, reinstall new rotors in the reverse order.
To replace the front parking brake cable on a 2005 Chevy Colorado, first, lift the vehicle and secure it on jack stands. Remove the rear wheels and brake drums to access the parking brake components. Disconnect the old cable from the brake lever and the rear brakes, then route the new cable in the same path as the old one. Finally, secure the new cable, reassemble the brake components, and test the parking brake for proper function before lowering the vehicle.
Remove the wheel from your 2005 Kia Sorrento. Remove the brake pad springs and retaining clips. Reverse the process to install the new brake pads.
Lift the car, remove the tire, remove the brake caliper, and remove the old brake pads. Put in the new brake pads, replace the brake caliper, replace the tire and lower the car.?æ
Lift the car on the car jack, remove the tire, remove the brake shoe/caliper, remove the brake pad. Put in the new brake pad, replace the brake shoe/caliper, put the tire back on the car, and lower the car to the ground.
Remove the tire and wheel from your 2005 Vectra. Remove the brake spring and break caliper from the brake pad assembly. The brake pads will come off. Reverse the process to install the new brake pads.
remove the power chip or disconnect the battery and then disconnect it manually!!