To remove the rear brake drum on a 2005 Suzuki XL7, first ensure the vehicle is securely lifted and supported on jack stands. Remove the wheel and tire, then locate the drum retaining screws, if present, and remove them. If the drum is stuck, gently tap around the edges with a hammer or use a brake drum puller to loosen it. Once free, slide the drum off the wheel hub, taking care not to damage the brake components inside.
how do you remove rear brake drum on a suzuki 2004 xl7
The first step is to remove the tire. The rear brake drum will have what is known as a self-adjusting screw. This may need to be adjusted to pull the drum off, once you have the tire removed.
To change the brake shoes on a Suzuki Samurai, first, lift the vehicle and remove the rear wheels. Then, take off the brake drum by removing the retaining screws or bolts. Once the drum is off, remove the old brake shoes by detaching the springs and any retaining clips. Install the new brake shoes by aligning them properly, reattach the springs, and reassemble the drum and wheel. Finally, pump the brake pedal to ensure the shoes are seated correctly before lowering the vehicle.
http://forums.genvibe.com/zerothread?id=26369
how do remove the brake drum on a 1991 mazda 323
To remove and replace the back brake shoes on a 2003 Suzuki Vitara, start by lifting the vehicle and removing the rear wheel. Then, detach the brake drum by removing any retaining screws or clips. Once the drum is off, take note of the arrangement and condition of the old brake shoes before removing them. Install the new brake shoes in the reverse order, ensuring that all springs and hardware are properly positioned, and then reassemble the drum and wheel.
You can remove the front brake drum, on your Kawasaki Mule 2500, by removing the wheel and axle. The brake drum will slide off.
How do you remove rear brake drum from a 1993 Toyota pickup?
With parking brake off, they just pull off to remove, but may require a couple taps with hammer if it's been a while.
If you're trying to remove the brake drum, be sure to NOT have the emergancy brake on. Remove the wheel and tap the drum with a rubber mallet until it releases, That's it!
To remove a rear brake drum on a Chrysler, first ensure the vehicle is safely elevated and secured on jack stands. Remove the wheel, then locate and remove any retaining screws or clips securing the drum. If the drum is stuck, gently tap it with a hammer or use a brake drum puller to loosen it. Once free, slide the drum off the hub to access the brake components.
To remove the rear drum from a 2005 Ford Transit, first, ensure the vehicle is securely lifted and supported on jack stands. Remove the wheel and tire, then locate and remove the retaining screws if present. Next, check for any clips or tensioners that might be holding the drum in place, then gently tap around the drum's edge with a hammer to loosen it. If the drum is stuck due to the brake shoes, you may need to adjust the brake shoes inward using the adjuster mechanism before pulling the drum off.