Anyone know is it possible to use the backseat as the third row ? Do they pull out and attach the same (specifically in a 1998 Ford Expedition XLT )
Remove the bolts and disconnect the wires and pull the seat out
To remove the back seat on a 1989 Ford Thunderbird, the first step is to remove the back of the seat. The back is held in by bolts on each side. After the back is removed, the seat area should come out after removing the floor bolts.
To remove the center seat from the second row of a 2006 Ford Expedition, first, locate the release levers or bolts securing the seat to the floor. For seats with release levers, pull the lever while lifting the seat to detach it. If the seat is bolted down, use a socket wrench to remove the bolts. Once detached, carefully lift the seat out of the vehicle.
The back seat on a Ford F150 FX4 can be removed by locating the straps in the back part of the seat. Pull up on the straps to remove the seat.
sounds like the blend door is not working
Yes, you can hook up a car seat to the Ford Expedition
No. The Expedition is much larger.
And your question is,,,,,,,,,,,,,,,,,
you people suck go ford
On the 1997-2000 Ford Expedition models the 3rd row seat are remove by. Folding seat in half then pull handle in the rear of the center of the seat bottom portion of the seat up. Pull handle and push top of seat forward. Be very careful the 3rd row seat is very heavy. Best bet is to get someone to help to fit it out.
Put the seatback down. It will lock in place. There is a small bar a couple of feet long at the back of the seat. Lift up on it and pull the seat toward the rear of the truck. That's it. It is fairly heavy though.
Have the SRS repaired, and wear your seatbelt.