Hi there, there should be four screws inside the centre console if you undo them your well away
:)
Yes
We have instructions on our enthusiasts website! www.trailvoy.com
how to change third or center brake light on Chevy beretta 95
Remove the center console/cupholder. Remove the interior doghouse. Remove distributor cap.
The only factory switches ever installed on a Chevy Beretta center console are power window switches, and trunk popper switch on the shift plate. There is also the cigarette lighter/power source. Anything else is aftermarket and added by the previous owner.
very carefully
To remove the center console on a 2010 Chevy Aveo, start by ensuring the vehicle is in park and the ignition is off. Next, carefully pry off any trim pieces surrounding the console, using a trim removal tool if necessary. Then, remove screws or bolts securing the console in place, which are typically located at the base and possibly near the gear shifter. Finally, lift the console upward and out of the vehicle, being cautious of any attached wiring.
Passenger side, underneath the glove box. You have to remove a panel from the center console.
To replace the center console bulb in a Chevy Aveo, first, ensure the vehicle is turned off and the keys are removed. Remove the center console cover by gently prying it up with a flat tool or your fingers, being careful not to damage any clips. Locate the bulb socket, twist it counterclockwise to remove it, then replace the old bulb with a new one, reassemble the console by reversing the steps, and test the new bulb to ensure it works.
You will need to remove the center console cover. The lightbulb will be attached to the inside of the center console. Push the lightbulb in and turn at the same time to remove it. Reverse the process to install the new lightbulb.
break it
Remove bottom plastic cover in center of dash first and then remove other plastic part that the first peace was attached to. (watch for hidden screws)