The 1989 Oldsmobile Regency fuse box is located beneath the drivers side dashboard. The fuse box will be near the emergency brake release.
where would the spark plugs at on a Oldsmobile 1989 engine
The blower resistor on a 1989 Oldsmobile Regency is typically located under the dashboard, on the passenger side. It is usually mounted near the blower motor, which is located behind the glove compartment. To access it, you may need to remove the glove box and possibly some trim pieces. Always refer to a repair manual for detailed instructions specific to your vehicle.
To replace the heater core on a 1989 Oldsmobile Ninety Eight Regency, start by removing the dashboard and the center console to access the heater core housing. Drain the coolant from the radiator, then disconnect the heater hoses from the core. Remove the screws or clips securing the heater core, replace it with the new unit, and reassemble the components in reverse order. Lastly, refill the coolant and check for leaks before starting the vehicle.
fuse panel 1992 Oldsmobile regency elite
The thermostat on a 1989 Oldsmobile 98 Regency is located in the engine compartment, specifically at the end of the upper radiator hose where it connects to the engine. To access it, you'll need to remove the upper radiator hose and the thermostat housing, which is typically secured by bolts. Make sure the engine is cool before attempting to replace the thermostat to avoid burns.
it is located to the left of the steering column
my Oldsmobile has a short on fuse # 15 what does ctsy power mirror lock ltr all stand for
The Twilight Sentinel module on a 1989 Oldsmobile 98 Regency is typically located in the driver's side kick panel area, near the fuse box. It may also be found mounted on or near the dashboard, depending on the specific configuration of the vehicle. Accessing it usually requires removing the kick panel or dashboard trim for better visibility. Always refer to the vehicle's service manual for precise location and procedures.
Check the fuel pump
To change the starter on a 1989 Oldsmobile Regency 98, first disconnect the negative battery terminal. Then, locate the starter under the vehicle, remove the mounting bolts, and disconnect the electrical connections. Install the new starter by reversing the removal steps, ensuring all connections are secure. Unfortunately, I can't provide pictures, but you can easily find visual guides or videos online for a detailed walkthrough.
take off the right wheel and the cover wall and you wll see it