There are 4 mounting bolds that hold the seat to the floor. Remove them. Pay attention to any wiring attach to the seat.
On the 1997-2000 Ford Expedition models the 3rd row seat are remove by. Folding seat in half then pull handle in the rear of the center of the seat bottom portion of the seat up. Pull handle and push top of seat forward. Be very careful the 3rd row seat is very heavy. Best bet is to get someone to help to fit it out.
Remove seat!
there should be a plug in under your drivers seat drive safe
Remove we beetle seats
Remove drivers seat by lifting tab on front of seat.
under steering column on drivers side,may wnt to remove drivers seat to get to it easier unless you can bend your body in a pretzel shape.
Remove the bolts and disconnect the wires and pull the seat out
the size that fits...
remove the passenger pad first, when removed it uncovers screws on the rear of the drivers seat. Remove these and it comes off.
there should be 4 bolts that hold the seat to the floor. just remove them and if it has power seat dont forget to unplug them.
Anything from the 1997 to 2000 will fit.
Fuse 4