remove the passenger pad first, when removed it uncovers screws on the rear of the drivers seat. Remove these and it comes off.
How do you remove seat off Kawasaki nomad
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
remove seat. remove tool case. Remove terminals from battery, lift out.
Push down on the seat while you are pulling the lever, then pull up on the seat. Edit: My 96 Kawasaki Vulcan has no leaver. You simply remove the thumb screw at the very back of the seat under the rack, then pull the seat backward till it pops free from the bracket.
When you open the toolbox on back of the seat, there are two bolts inside. Remove the and the seat lifts right off.
under the seat.
under the seat
To remove the seat on a 2004 Kawasaki Vulcan 800, first locate the seat release bolts or screws, typically found at the back of the seat. Use a suitable tool, usually a socket or wrench, to loosen and remove these fasteners. Once the bolts are removed, gently lift the rear of the seat and slide it backward to detach it from the front mounts. Make sure to keep the fasteners in a safe place for reinstallation.
The seat of any Kawasaki Vulcan will fit a mean streak with a little fabrication.
Under the seat Accessible by removing both side covers and seat
Under the seat in front of the battery.
1993 kawasaki voyager motorcycle how do you remove the driver seat?