0
What else can I help you with?
How do you remove the front rotor on a 1993 F 150 4X4?
How do you remove a front rotor on a 1993 F 150 4X4
How do you replace brake rotor on 1993 buick centruy?
Do you mean rotor? If so, remove the distributor cap and remove the old rotor and install the new one. Simple repair.
How do you change rear brakes and rotor on 1993 Lincoln town car?
Remove the tire and wheel from your 1993 Lincoln Town car . Remove the brake spring and break caliper. Remove the brake rotor by tapping on it with a hammer or mallet. Slide the rotor off. Reverse the process to install the new rotor and brake pads.
What is the firing order for a 1993 Suzuki Sidekick?
1.6L1,3,4,2, CCW , rotor, 8valvesCW rotor rotation on 16v.
How do you change the brakes and rotors on a 1993 Chevy Lumina?
Remove the tire and wheel from your 1993 Chevy Lumina. Remove the brake assembly spring and the brake caliper. The brake assembly will come off. Tap on the rotor with a hammer or mallet. The rotor will slide off. Reverse the process to change the new rotor and brakes.
How do you remove the brake rotors on a 1993 Buick Century?
Remove the tire, brake caliber and the rotor should side off the hub.
How do you remove the front rotors on your 1993 Geo Metro?
Remove the wheel and brake calipers. Be careful not to let the caliper hang by the brake line. Use a hanger to hold it up and out of the way.On the rotors the are screws close to the center of the rotor, remove these screws and the rotor just slides off. The screws can be tough, dont strip the heads, use the appropiate size screw driver and tap a few times with a hammer, that may help loosen it. I didnt put the screws back in after replacing the rotor, I believe that is a optional choice.
Where is the ignition control module on a 1993 Chevy G20?
In the distributor,you need to remove the dist cap & then remove the rotor and it will be mounted to the distributor housing
How do you remove the front axles on a 1993 Honda Civic?
Begin by removing the tire and wheel from your 1993 Honda Civic. Remove the brake assembly and the brake rotor. Remove the axle retaining bolts. The axle will come off.
How do you remove front rotor to replace on a 1993 Ford Bronco XLT?
I have the same problem can't seem to pull in the retaining ring far enough to remove hub and rotor don't know if I'm doing it right. Will update if I get it off.
How do you repack warn hubs on ford f350 1993?
Remove wheels Remove 2 caliper mounting bolts (if so equipped) Slide caliper off rotor and support Remove center hub (probably spring loaded) Slide gear out Remove spanner nut and spacers Wiggle rotor outer bearings should fall out Pull rotor off and inner bearing will come out with it
How do you change front wheel bearings on a 1993 Ford F 150?
Remove brake caliper, then caliper mounting. Now tap back of rotor to remove it. Now undo large nut holding hub and pull hub off. Replace in reverse order.
