0
What else can I help you with?
On a 1996 Chevy silverado will it lower the truck 2 inches if you remove the load spring?
NO it will not.
How to remove a lower ball joint on a 1995 Chevy s-10?
Remove the tire and wheel from your 1995 Chevy S 10 pickup truck. Remove the ball joint retaining nut. Pound the ball joint out with a hammer.
How do you drain the radiator on a 1998 Chevy silverado 5.7?
Remove the plug at the bottom or the rear of the radiator or remove the lower radiator hose
How do I replace lower ball joints on 1999 Chevy lumina?
Remove the tire and wheel from your 1999 Chevy Lumina. Remove the nut on the top of the ball joint. Pound the ball joint out with a hammer. Reverse the process to install the new ball joint.
How do you remove lower ball joint on 2003 GMC savana?
how to remove lower ball joint on 2003 gmc savana van
How do you release the drain plug on a 98 Chevy truck 5.7 liter silverado?
If it is a plug it unscrews counterclockwiseIf it is a petcock it opens clockwise Remove the lower radiator hose
How do you remove lower ball joints in a suburban 1998?
To remove the lower ball joints on a 1998 Chevy Suburban, first, raise the vehicle and secure it on jack stands. Remove the wheel and tire, then detach the brake caliper and rotor for better access. Use a ball joint separator tool to disconnect the ball joint from the control arm, and if necessary, remove the retaining nut from the ball joint stud. Finally, press the ball joint out of the steering knuckle using a ball joint press or a similar tool.
How do you replace a lower ball joint on a bravada?
You will need to remove the tire and wheel from your Oldsmobile. Remove the retaining not on top of the ball joint. Pound the ball joint out. Reverse the process to install your new lower ball joint.
Lower ball joint on 06 dodge ram 4x4 get pushed down or up to remove?
Unless common practice has changed, you should have to press the lower ball-joint down through the bottom of the lower A-arm to remove the joint.
How do you change front shocks on a 2007 Chevy silverado 1500 LS 2 wheel drive?
You first need to jack up the front you are working on from the lower ball joint. Then you only need to unscrew the top mount nut and remove the 2 lower mounting bolt and slide the shock out the bottom of the lower control arm. Reverse the procedure to install the new shock. Repeat the steps on the other front corner.
How do you replace a lower ball joint on a 99 Pathfinder 4wd?
First you need to jack the vehicle up and support it on stands, then remove the tire. Remove the torsion bar and disconnect the lower shock mount, and remove the stabilizer bar connecting rod from the lower link. Loosen the lower ball joint nut, and use a ball joint separator to separate the ball joint from the lower link, then disconnect the tension rod from the lower link. Remove the front lower link pivot nut and push the stud out, then remove the torque arm from the frame. Remove the ball joint by removing the retaining bolts and install the new one, I suggest you replace the bushing as well.
Can you lower a Chevy Silverado 4wd truck?
Just drive it off a cliff... Its POINTLESS. Unless your GHEY.
