0
First off, be sure to remove all screws out of the door panel... check all visible spots on the door to insure there are no screws left in the panel-all so be sure to check under the pull handle ( the 2 square slots that pop off have screws in them that have to be removed) under the window control unit ( use a flat tool to pri the unit out of the door panel , there should be 2 more screws holding the panel on). now remove all control units , such as the door lock control and window control- unscrew the lock handle at the top of the door panel. The last thing you will need to do is pop the panel off from the door its self- its being held on by plastic anchor like screws all you have to do is use a tool that's about 8- 12 inches long to pri them off from the panel, some of the screws may come out of the panel, some may come out the door don't worry only thing to look for while doing this job is for the card board holding the panel to the door does not rip , since the car is so old and more than likely never had the panels removed or replaced... but that's about it , its not much to it jus the procedure of removeing the screws that's holding it on.. hope it helps
What else can I help you with?
How do you replace the exterior door handle on a 1984 Chevy Caprice?
Remove the inside door panel from your 1984 Chevy Caprice. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new exterior door handle.
How do you remove front driver side door panel on 1993 Chevy caprice classic?
The 1993 Chevy Caprice Classic drivers side door panel is held in place with for retaining bolts and 10 retaining clips. Remove the retaining bolts and pry outward on each retaining clip.
How do you take a 1985 Chevy caprice driver side door panel off?
The 1985 Chevy Caprice driver side door panel is held in place with for retaining bolts and 10 retaining clips. Remove the retaining bolts. Pry outward on each retaining clip. The door panel will come off.
How do you remove front door panel on 1988 Chevy Caprice?
Removing the front door panel can be tricky. Remove the screws in the armrest, remove the bracket pin the wood trim, remove the armrest, remove the leather strip, disconnect any wires, remove the brackets and screws in the door panel and pull gently on the panel to remove it.
How do you remove a 1959 Chevy door panel?
Remove the screws in the door panel.
Where is the fuse box in a 1992 Chevy Caprice?
your fuse box for a 1992 Chevy caprice, is in the drivers side panel when you open up the door. it is next to the door/window defroster.
How do you remove driver door power window switch on a 1995 caprice?
On a 1995 Chevrolet Caprice your door panel and window switch are two different parts. To remove the door panel you remove the 8 screws along the outer edge of the door and then pull the panel off. to take the switch off there are 4 more screws on the back of the panel you remove
How do you remove a door panel on a 1991 Chevy Corvette?
== ==
How do you remove the driver door panel on a 2002 Chevy Malibu?
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
Where is the fusebox on a Chevy Caprice classic?
AnswerLook under the kick panel driver's side. Should be to the above left of the brake pedal.For 1991 and up Caprice, open the driver's door and remove the cover from the side of the dashboard.
How to remove door handle 1987 Chevy?
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
How do you remove inner door panel on 2006 Chevrolet Malibu?
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
