most gm's have a small spring clamp located on the bottom of arm that attaches to
the motor arm, bottom of arm, if you look close to it , u can take a small screwdriver and
release this , BEING VERY! CAREFUL NOT TO SCRATCH CAR, and with a little pressure or prying up, carefully , this will come off. installing one is to line it up for wiper to rest at bottom of windshield, in the off position, then lightly pushing down and you will hear/feel it click back into place.
To remove the wiper arm, first remove the wiper blade. After the blade is removed, lift the arm just slightly to clear the tab protruding from the side of the arm. Pull the tab out after it ckears the arm and then pull the arm off the hub.
To remove a wiper arm from a 1986 Chrysler LeBaron, first, lift the wiper arm away from the windshield to a vertical position. Locate the small retaining nut at the base of the wiper arm and use a socket wrench to loosen and remove it. Once the nut is removed, gently wiggle the wiper arm back and forth while pulling it upward to detach it from the pivot shaft. If it's stuck, you may need to use a wiper arm puller for better leverage.
Remove plastic cap. Remove nut. Pry up wiper arm.....
Remove the wiper arm retaining clip. The retaining clip will be just below the wiper arm connection. Hold the retaining clip in and the wiper arm will come off.
A wiper arm on a 2001 Honda Civic is screwed on. To remove it unscrew the mounting hardware and take off the wiper arm.
you just pick up the wiper arm
# Raise the rear wiper arm finish cap to expose the wiper arm nut. # Remove the rear wiper arm nut (1). # Lift the rear wiper arm assembly (2) away from the rear window and remove the wiper arm from the pivot shaft. The cap tilts up toward the arm
To remove the spring loaded wiper arm you have to first of all to unscrew the screws. After the screws have been removed, the spring loaded wiper arm can then be removed.
look at the half circle clip on the side of wiper arm. lift the wiper arm and pull the clip out as far as it goes the wiper arm should rest on the clip and now be "locked" up in the air . now you should be able to remove the wiper arm
You can remove the 2005 Ford Explorer rear wiper arm by removing the retaining clip. The retaining clip is just below the wiper arm connection.
You don't have to remove wiper arm. The wiper blade will slide out, It has a clicker in the center of the blade that you have to slide it out. Look at it very carefully
To remove the wiper arm on a 1996 Mitsubishi Mighty Max, first ensure the wipers are in the "off" position. Then, locate the small plastic cover at the base of the wiper arm and gently pry it off to expose the mounting nut. Use a socket wrench to remove the nut, and then carefully wiggle and pull the wiper arm straight off the wiper motor shaft. If the arm is stuck, a wiper arm puller tool can help safely remove it without damaging the arm or the shaft.