0
**Removing the old EGR valve**
1. Disconnect the Exhaust Gas Recirculation (EGR) valve:
§ Disconnect the vacuum line.
§ Disconnect EGR tube nut.
2. Remove the EGR valve:
§ Remove the two bolts.
§ Remove and discard the old gasket.
**To Install the new EGR valve**
§ Install the new gasket.
§ Install the two bolts. Tighten the bolts to 18 ft. lbs. (25 Nm).
3. Connect the Exhaust Gas Recirculation (EGR) valve:
§ Connect EGR tube nut. Tighten the nut to 37 ft. lbs. (50 Nm).
§ Connect the vacuum line.
4. Carefully clean both sealing surfaces and install a new EGR valve gasket. You're done!
What else can I help you with?
Where is PCV valve located on Taurus se and how to replace?
location and replacement of pcv valve and egr valve on 2005 Ford Taurus se
Your response to How do you replace an EGR valve on a 2002 Ford Taurus was that there was a hidden warranty how do you find out about that?
Contact your dealer.
How to correct exhaust recirculation deficiency on a 1999 Ford Taurus?
This issue is typically caused by a broken or jammed EGR (Exhaust Gas Recirculation Valve). To remedy the problem, you must remove the old EGR valve and replace it. Attached is an Article from AutoZone on how to determine if it is the EGR valve and how to replace the EGR on a Generation 3 (1996-1999) Ford Taurus, It will also determine if your problem lays in other EGR components.
How do you change the egr valve on a 2002 Ford Escape?
How do you replace the EGR Valve on a 2001 Ford Escape?
How do you replace an EGR valve on a 2001 Ford Taurus?
do you have the 3.0 V6 12 valve engine, or the 3.0 V6 24 valve DOHC engine? 3.0 v6 12 valve
Does the 2003 ford ranger edge 4.0 liter have an egr valve?
Yes, it does have an EGR valve.
What does the error code p0401 mean on a 1999 Ford Taurus?
insufficient egr flow most causes a burned silicone hose to egr pressure sensor
How do i fix the egr valve on a 2003 ford explorer?
in ya mum
What is code P1409 for a Ford Taurus 2002?
Code P1409 for a 2002 Ford Taurus indicates an issue related to the EGR (Exhaust Gas Recirculation) system, specifically that the EGR valve is stuck open or there is a problem with the EGR control circuit. This can lead to increased emissions and poor engine performance. Common causes include a faulty EGR valve, vacuum leaks, or problems with the EGR control solenoid. It's advisable to inspect the EGR system components and associated wiring for faults to resolve the code.
Where is the egr valve on a 2002 ford Taurus?
it is beyond the main throttle body. it is round about the size of a tangerine. it is black on my car.
Where to find and how to replace a DPFE sensor on a Taurus?
The DPFE (Differential Pressure Feedback EGR) sensor on a Ford Taurus is typically located near the EGR valve, often mounted on the intake manifold or firewall. To replace it, first disconnect the negative battery cable, then unplug the electrical connector and remove the mounting screws to take out the old sensor. Install the new sensor in the reverse order, reconnect the electrical connector, and reattach the battery cable. Always consult your vehicle’s service manual for specific instructions related to your Taurus model.
How do you replace the EGR valve on a 2002 Ford Mustang?
just unbolt the valve
