Drain the gas from the gas tank. Remove the gas line. Remove the fuel pump retaining plate. Pull the fuel pump out. Reverse the process to install the new fuel pump.
is there a fuel cut off switch in an oldsmobile bravada
The Fuel Tank Pressure Sensor on a Oldsmobile Bravada 2000 is on the top of the Fuel Pump Assembly.
it is located inside the intake manifold
60-66PSI I think.
In the Fuel Tank.
remove fuel pump fuse. then start engine it will stall when fuel runs out change filter then replace fuse.
It is located in the fuel tank on the top. Unless there is a access panel somewhere inside the vehicle, you will have to remove the tank in order to get to the pump. Be sure to also replace the fuel filter.
Oldsmobile vehicles do not have inertia/reset switches.
Answerthe fuel pump is in the tank you need to drop the tank unplug the pump take off snap ring lift pump out
The fuel pressure regulator is on a 2001 Bravada is located in the rear on the gas tank. It is in the fuel line between the fuel pump and the gas tank.
I believe it's 18 gallons.
does not have one only fords