0
What else can I help you with?
How do you replace slave cylinder on 1998 Chevy S10 manual transmission I have been told I need to replace the entire transmission. Is this true?
The transmission must be removed, and put back in, not replaced.
Where is the slave cylinder located on a 2000 Chevy S10?
The slave cylinder is inside the trans. If you need to replace it you will have to pull the trans out. Its not that bad, its a afternoon though.
How do you change a clutch slave cylinder on a 1988 Chevy S10 Pickup?
You will need to remove the transmission to replace the clutch slave.
How much does it cost for labor to install a clutch slave cylinder on a 1998 s10?
How much labor will cost a person in order to install a clutch slave cylinder on a 1998 S10 will depend upon how much labor charges are. It should take a mechanic no longer than 30 minutes in order to install the clutch slave cylinder.
How do you change hydraulic clutch in 99 Chevy s10?
Which part do you want to replace? The slave cylider or the master cylinder? The hydraulic line and master cylinder.
How to remove Clutch slave cylinder S10?
the slave clutch cylinder is located inside the housing of the clutch/transmission. Unless you really know what you are doing a trained tech probably should replace this part.
How do you connect the hydraulic to the clutch slave cylinder on a 2000 S10 chev pickup 2.2 4 cylinder?
how do you connect the hyraulic master cylinder to the clutch slave cylinder on a 2000 chevy S10 pickup 2.2 4.cylinder
How do you change a master cylinder for a 1998 Chevy S10?
How do you change a Master Cylinder and hydraulic clutch line for a 1998 Chevy S10?
Where is slave cylinder located on a 2000 Chevy s10?
i have an s-10 myself and need to replace that too,but to answer your question i was told it is inside of the transmission.
How do you replace the clutch cylinder slave in a 1997 Chevrolet S10 pick up?
Replacing the clutch slave cylinder requires removing the transmission assembly. I would recommend purchasing a shop repair manual for that vehicle if you intend on DIY.
Where is the slave cylinder at on a Chevy 1991 S10?
Inside bell housing. Transmission has to be removed to gain access to the slave cylinder/throw-out bearing.
Why is clutch fluid leaking between transmission and motor on 1991 Chevy S10?
The clutch slave cylinder is probably at fault. Replacement is necessary to fix problem. Transmission must be removed to gain access to the slave cylinder.
