0
What else can I help you with?
Why is clutch fluid leaking between transmission and motor on 1991 Chevy S10?
The clutch slave cylinder is probably at fault. Replacement is necessary to fix problem. Transmission must be removed to gain access to the slave cylinder.
How do you connect the hydraulic to the clutch slave cylinder on a 2000 S10 chev pickup 2.2 4 cylinder?
how do you connect the hyraulic master cylinder to the clutch slave cylinder on a 2000 chevy S10 pickup 2.2 4.cylinder
Where is the slave cylinder on a 2002 Chevy S10?
the slave cylinder is bolted to the drivers side of the transmissions bellhousing,the reservoir for it is on tne drivers side firewall
Where is the slave cylinder located on a 2000 Chevy S10?
The slave cylinder is inside the trans. If you need to replace it you will have to pull the trans out. Its not that bad, its a afternoon though.
How do you change a clutch slave cylinder on a 1988 Chevy S10 Pickup?
You will need to remove the transmission to replace the clutch slave.
What is the diagram for 1991 Chevy s10 spark plug wires - 4 cylinder?
The diagram.
How and where do you change a slave cylinder for a 1993 Chevy S10 manual pick up?
The slave cylinder on my s10 in on the driver side of the transmision. There are only 2 nuts that have to be removed to take the slave cylinder off. Then u must take out the pins to remove the clutch line.. Hope this helps
What size 6-cylinder does the 1991 Chevy s10 have?
Either 4.3 or 2.8 (VIN R)
What is the spark plug gap setting for a 1991 Chevy S10 4 cylinder?
0.45 inch
Where is clutch slave cylinder on a 1999 Chevy s10?
It is inside of the transmission bell housing. You will have to remove the transmission to service it.
How do you change hydraulic clutch in 99 Chevy s10?
Which part do you want to replace? The slave cylider or the master cylinder? The hydraulic line and master cylinder.
How do you change a master cylinder for a 1998 Chevy S10?
How do you change a Master Cylinder and hydraulic clutch line for a 1998 Chevy S10?
