0
What else can I help you with?
How to Replace speedometer cable 1989 Toyota truck?
Speedometer cable replace 1989 toyota
How do I replace an old window regulator on a 1989 Oldsmobile 88Royale with a new one and is the regulator the same thing as the motor?
The regulator is the part that raises the window. Can be a notched curved piece and a X shaped arm that raises the window or a plastic strip that runs in a grove. The motor can be changed. I belive regulator and the motor are both held in by rivots. These can be drilled out and replaced with bolts.
How do you get the window motor and gearbox out of a 1989 Mercury Grand Marquis?
The motors were installed with rivets at the factory. You need to use a drill and drill out the rivets to remove the motor. The replacement motors come with screws and bolts to replace the rivets.
Will a 1989 Chevy truck motor fit into a 1997 Chevy truck?
yes as long as they are both v6s or v8s
What motor does a 1989 z71 have?
The engine in your truck is a Chevrolet 350 if it a stock engine!
1989 Grand Marquis drivers window goes down but not up and its not the motor what could the problem be?
It's all part of a kit. You'll have to replace the whole kit to gain success.
What is the firing order for a 1989 427 Chevy Truck Motor?
Distributor rotates clockwise.
If only one electric window goes down main the passager side how to fix the driver side on 1989 firebird?
Take out the middle console and check the wires to make sure they are still plugged in. If they are then you probably need to replace the window motor.
How do you fix power window on a1989 gmc vandura 2500 van?
To fix the power window on a 1989 GMC Vandura 2500 van, first, check the fuse related to the power windows and replace it if necessary. If the fuse is intact, remove the door panel to access the window motor and switch. Test the switch with a multimeter; if it's faulty, replace it. If the motor is the issue, you may need to replace it, ensuring all connections are secure and lubricating any moving parts during reassembly.
Install rear window Toyota truck 1989?
To install the rear window on a 1989 Toyota truck, first ensure you have the correct replacement window and any necessary seals or adhesives. Begin by cleaning the frame of the truck thoroughly to remove any debris or old adhesive. Apply a bead of adhesive around the window opening, then carefully position the window in place, pressing it firmly to create a seal. Finally, secure the window with any trim pieces or clips as needed, and allow the adhesive to cure according to the manufacturer's instructions.
How do you replace driver's door mirror on 1989 Chevy pickup truck?
All you have to do is if its a power window truck is take the screws out of the door panel and pop all the clips loose. Then unplug the window and lock switches. There are 3 bolts that hold the mirror on behind door panel. If manual locks and windows, mainly the same but dont have to unplug wires but have to pop clip off handle for window and lock.
How can you replace a drivers side window on a 1989 ford aerostar van?
Electric or manual?
