There is no spring loaded tensioners on the Mercury Villager. Look for manual adjustments, loosen the nut in the center of the adjustment idler's and then move the adjustment bolts toosen the belts for replacement. Since this vehicle does not have just one long serpentine belt the routing is fairly simple to figure out. If the belts are still on the vehicle you can draw a quick sketch of the routing to help when re-installing the belts.
where is the PCM located on Mercury Villager 97
There is no such device on a '97 villager.
The cruise control computer module is located on the passenger's side of the engine compartment on a 1993 Mercury Villager.
on my 1999 ford mercury villager its on top of transmission under the van
The cruise control module of a 1993 Mercury Villager is located under the passenger side of the dashboard.
In the cylinder head .
Inside the distributor
The filter is located behind the RH side of the carbon canister under the hood.
can you tell me where the knock sensor is located on a 3.3l mercury villager
On a Mercury Villager ( being a front wheel drive vehicle ) The transaxle ( transmission ) is located in the engine compartment to the drivers side of the engine
It is located in the distributor unit.
In the engine compartment