To replace the axle seal on a 2003 Cadillac DeVille, first, lift the vehicle and remove the wheel and brake components for access. Then, remove the axle nut and gently pull the axle out of the hub, taking care not to damage the surrounding components. Use a seal puller to remove the old axle seal from the differential housing, clean the area, and install the new seal, making sure it is seated properly. Finally, reassemble the axle, brakes, and wheel, ensuring everything is tightened to manufacturer specifications.
The air compressor is located above the rear axle on the passenger side
buy a Buick
Above the right rear axle. you can see it if you lay on the ground and look above the axle from the rear of the car
hire someone hire someone
Most likely it is the front axle joint
You must replace entire axle.
There is a bad or damaged ground to the the ECM
They are pressed in the axle. Take it to a garage.
The load level sensor is dead canter between the rear wheels mounted on the body with a two piece linkage running to the "axle"
Usually underneath near the back axle.
In central Florida, $2400
On the rear axle?