0
Hold the end of the door with a jack, grind the head from the old pin, knock out the old pin, remove the door half of the hinge, drill out the hinge to accept the new bushings, install the new bushings, re-bolt the hinge to the door, finally, insert the new pin and install the C clip
What else can I help you with?
How do you change water pump on 1993 Mercury Cougar?
how do you change a water pump on 1993 Mercury Cougar
Brake fluid 1993 mercury cougar?
A 1993 Mercury Cougar takes ( DOT 3 brake fliud )
How do you fix door latch on a 1993 Mercury Cougar that only work half the time?
get a hinge replacement kit for that door. its the door sagging NT the latch.
What type of refrigerant does a 1993 Mercury Cougar use?
What type of freon does a 1993 cougar use
Where is the module located on a 1993 Mercury Cougar?
In the trunk
Where is the voltage regulator on 1993 mercury cougar?
embedded with alternator
How do you replace lower ball joint on 93 Mercury Cougar?
Remove the tire and wheel from your 1993 Mercury Cougar. Remove the ball joint retaining nut. Pound the ball joint out with a hammer. Reverse the process to install your new ball joint.
How do you take the head light dome light switch off on a 1993 Mercury Cougar?
You don't. The switch is all one , you will have to replace the entire switch.
What was the original price of a 1993 Mercury Cougar?
the orignial price was $17,890
Removal of water pump on an 1993 mercury cougar Rx-7?
ok
What is the spark plug gap 1993 Mercury Cougar?
.040 ========================================================== According to one of Fords websites : For a 1993 Mercury Cougar : The 3.8 liter V6 engine and the 5.0 , V8 have spark plugs gapped at : ( .054 inch )
How do you change the bushings around the door hinge pins on a 1993 Mercury Cougar XR7?
HAVE SAME PROBLEM,TOOK DRIVER SIDE DOOR OFF AND IT LOOKED TO ME LIKE THE PINS WERE PRESSED IN.AM NOW WONDERING IF THIS IS THE FACT OR IS THERE A WAY TO GET IT OUT. A SPECIAL TOOL OR PRY LOOSE WHAT COULD BE A CAP ON THE BOTTOM OF HINGE.
