answersLogoWhite

0

reove the door panel by removing arm rest screws, then carefully pry up wondow contro;l and remove the connector. next get a v shaped tool from any auto store, and carefully pop the side panel off. Before total removal unplg the led and mirror control. TAPE WITH Duct Tape THE WINDOW IN THE UP STATE!!!!!FAILURUE TO DO SO WILL CAUSE YOU INJURY!! You will see the motor ....unplug the connector and remove 3 10mm nots. Wiggle the motor out. To install wiggle motor in, and revese the removal. If the car is a 4 door remember lf/rr interchange as well as rf/lr if ypou get one from a recycler.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you fix a 99 Voyager drivers power window that won't go down and only makes a buzzing noise from the switch?

Replace the switch.


How does a passenger window stop in the down mode and all other windows work properly what could be the problem?

Replace the switch ! It is really not that expensive and it will fix the problem !! If it works from the drivers door replace the switch on the door that doesn't work ! If it works at that door replace the drivers switch ! KM


How do i fix a celica where drivers window works fine but other three windows will not roll down and has no motor sound and the indicator light on the window button is not lit but drivers button is?

you need to replace the window master switch


The driver's power window is the only window not working. What is wrong?

cANNOT GET THE DRIVERS SIDE WINDOW UP, IT IS PARTWAY DOWN AND HAVE TRIED SPRAYING CLEANER IN IT, NO GO. WHAT DO I DO? The switch, or relay, for that window is faulty, or worn out (since drivers window is most used). Replace it.


94 Camry drivers window only works when weather is cold but other windows work?

REMOVE AND REPLACE SWITCH AND CRIMP THE CONNECTOR TO THE SWITCH.


How do you replace the light bulb that illuminates the window switch on the door arm rest of a 1991 Buick LeSabre?

The switch assy pries out of the door but you hjave to be extremely careful not ot break something. You will see the bulb then.


How do you replace window regulator in 2003 Buick LeSabre front driver side?

The way that replace a window regulator in a 2003 Buick LeSabre front drive side is by removing the door panel. Next, disconnect the electrical connector on the regulator and replace.


Cavalier 2002 drivers power window seem to work on and off?

You are going to have 2 things to repair with this problem. The window switch and the window motor. The weak motor has melted the inside of the switch. Yep...been there,done that.Replacing the motor wont fix the switch and if you replace the switch the weak motor will melt the new switch.


How do you replace window toggle switch 1999 Buick century?

how to replace window toggle switch 1999 buick century


How do you replace the power window switch on a 1993 Mazda mx3?

in the hand part where you close the door theres a screw, take it off, pull the assembly from the top by the window switches, when it comes out the wires will follow, disconnect the harness, and replace with the new power switch. (note this is the drivers side)


How much does it cost to replace glass in window?

audi a3 how much replace drivers side window


The drivers side window on a 1986 Buick Lesabre is still on it's track but crooked the pinbearing in the back of the well is missing resulting in a guilitine effect how do you resolve this?

The window track system for the 1986 LeSabre needs to gone over thoroughly. Look for any loose or worn tracks or bearings. Replace the pinbearing and lube all necessary components. Its basically a full rebuild of the window track system.