My 2004 Vue would've been fairly easy but over time the bearing/hub melded itself to the swing arm. Had to take it in so they could beat the crap out of it to get if off. Total job $124.00 (pretty cheap) and 5 hours of cussing and swearing from me trying to do it myself in December in Michigan....!!!! IF all goes well with yours, obviously take the tire, brakes, rotors, and then the bearing/hub assy should come off--don't remember how many bolts though. If you're mechanically inclined this actually isn't a tough job.
You need to have a wheel press. Other than that it's self explanitory.
how to replace front wheel bearing on 1996 Hyundai elentra
To replace the left front wheel bearing on a 2001 Saturn SC2, start by safely lifting the vehicle and removing the front wheel. Next, detach the brake caliper and rotor, then remove the axle nut and disconnect the hub assembly from the steering knuckle. Use a bearing puller to extract the old bearing, clean the area, and press in the new bearing before reassembling everything in reverse order. Be sure to torque all bolts to the manufacturer's specifications and check for proper wheel alignment afterward.
To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.
Take wheel off, put bearing in
Is the wheel bearing on the front or the rear ????.. There is a big difference ...
You can replace the front wheel bearing, on your Kawasaki Mule 3010, by removing the axle. With the axle Remove the wheel bearing will slide off.
The front wheel bearing is a sealed unit with the wheel hub - replace the hub and wheel bearing unit. Remove the four bolts from the rear of the steering knuckle that connect to the hub bearing unit.
Could be a wheel bearing, brake pads worn,
you can replace it by taking it to the shop and they will do it for you.
How do you replace front wheel bearing on a ford focus
Get a manual for this vehicle.