Lift the hood and look on the top of outside part of the plastic headlight assembly. Take out the hex head screw with a 10 mm socket. The fake plastic light assemby outside of the headlight will now come off. Take out the hex head screw behind this assembly and the two hex head nuts connecting the the upper side of the headlight assembly to the body. The whole headlight assembly will now come out. Unplug the sockets. You will need a small torx screwdrive to remove the screws holding the lamp assembly. Twist the socket and it will come out. Give your local autoparts store $10 for a new bulb and socket.
remove the plastic cover where the light is, then remove the 4 screws that hold the the thin metal frame that holds it in place. pull the bulb out, unplug it and then reverse the process
To replace the headlamp bulb on a 2008 Kia Amanti, first, open the hood and locate the back of the headlamp assembly. Disconnect the electrical connector from the bulb and remove the retaining clip or twist the bulb socket counterclockwise to release it. Replace the old bulb with a new one, ensuring not to touch the glass with your fingers, and then reassemble by reversing the steps. Finally, test the headlamp to ensure it is functioning properly.
with your hands ?
ask someone else to do it
To replace the headlamp on a Citroën Xantia, start by opening the hood and locating the headlamp assembly. Remove the screws or clips securing the headlamp, then carefully pull the assembly out. Disconnect the wiring harness and remove the old bulb by twisting it counterclockwise. Insert the new bulb, reconnect the wiring, and secure the headlamp assembly back in place before testing the new bulb.
To replace a headlamp bulb on a 2007 Nissan Murano, first, turn off the vehicle and open the hood. Locate the back of the headlamp assembly, then remove the electrical connector by pulling it straight off. Twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one, taking care not to touch the glass. Reinsert the bulb socket, reconnect the electrical connector, and test the headlamp before closing the hood.
1/4 turn to release the old bulb.
Carefully! there very expensive.
very carefully very carefully
Don't look on this site anyway
To replace the headlamp bulb on a 2003 Toyota Avensis, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the back of the headlamp assembly; you may need to remove a cover or clip. Disconnect the electrical connector from the old bulb, then twist and remove the bulb from the socket. Insert the new bulb, reconnect the electrical connector, and replace any covers or clips before testing the new bulb.
To replace the headlamp bulb on a 1996 Infiniti I30, first, open the hood and locate the back of the headlamp assembly. Disconnect the electrical connector by pulling it straight off. Remove the rubber cover, then twist the bulb socket counterclockwise to release it. Replace the old bulb with a new one, making sure not to touch the glass with your fingers, then reassemble by reversing the steps.