just unscrew it at the fittings and take it off and take it to the parts store with you and get another line at the parts store and bend and reinstall.
take the brake line out of the back of the wheel cylinder, pull the brake pads off and then take the 2 bolts out of the back of the cylinder and pull the wheel cylinder out.
your mechanic would have to install new brake lines.
How do i replace brake lines on a 2000 grand am
measure affected line
Length of back brake line to replace. hole in it between front and back door
Replace the brake line, bleed the brake. top up with brake fluid. Done.
depends where the leak is. In the brake line or at the pump? electric or mech brakes? if its in the line you should be able to replace the line section
replace brake line the damage to the line or if the jb weld gets into the line it will affect how the system works.
To replace the brake line on a 1999 Mercury Sable, first, safely lift the vehicle and secure it on jack stands. Locate the damaged brake line, then use a line wrench to disconnect it from the brake components and remove any mounting clips. Cut and replace the line with a new pre-bent brake line, ensuring proper routing and securing it with clips. Finally, bleed the brake system to remove any air before testing the brakes.
Remove the line and replace it. Then make sure to keep the master cylinder full while you & a helper bleed the front brake caliber. Be sure and use brake line tools and not open-end wrenches or you will damage the brake lines.
replace the line and fill and bleed breaks.
Replace and bleed line