To replace the AC compressor in a Mercury Villager, first, disconnect the negative battery terminal and recover the refrigerant from the AC system. Then, remove the serpentine belt and any components obstructing access to the compressor, such as the mounting brackets. Unbolt the compressor from its mounting points and disconnect the electrical connectors and refrigerant lines. Install the new compressor, reattach the refrigerant lines, reconnect the electrical connectors, and refill the AC system with refrigerant before testing the operation.
This is not cost effective. It's quicker and cheaper to replace the compressor.
shouldn't run anything else, my 94 doesnt.
how do you replace the AC compressor clutch on 2006 liberty
how to replace AC compressor on a 97 Buick park Ave
New AC compressor for my 93 Ranger was $156.
generally u dont replace clutch as it is more prudent to just get a used compressor from junk yard. you will need a pair of snap ring pliers. 1. remove nut on compressor shaft and remove clutch plate. 2. remove snap ring holding pulley on compressor. 3. use two screwdrivers on opposite sides of pulley to help slide off pulley.
Yes.
my ac compressor is bad and i want to change it myself how can i do this
you have the mechanic do it for you
R-134a
To replace the AC compressor in a 1999 Grand Prix you must first remove the AC belt. Then disconnect the negative battery cable before removing the compressor bolts and connectors and removing compressor.
The compressor will seize. They are very costly to replace.