To replace the heater control valve in a 2006 Pontiac Montana, first, disconnect the negative battery terminal to ensure safety. Drain the coolant from the radiator, then locate the heater control valve, which is typically found near the firewall. Remove the hoses connected to the valve, unscrew it from its mounting, and install the new valve in the reverse order. Finally, reconnect the hoses, refill the coolant, and check for leaks before reconnecting the battery.
Where is the heater core for a 2002 pontiac montana
The 2001 Pontiac Montana block heater cable can be found in the front of the vehicle. You can access the block heater cable through the front grill.
Could be low coolant, stuck thermostat, bad heater control head (if climate control)
Where is the the heater control valve??
this is the stupidest website ever
To replace the heater core in a 2001 Pontiac Montana, start by disconnecting the battery and draining the coolant from the radiator. Remove the dashboard and center console to access the heater core, then disconnect the hoses and any electrical connections. Carefully remove the old heater core and install the new one, reassembling the components in reverse order. Finally, refill the coolant, check for leaks, and reconnect the battery.
where is the heater core at
where is the heater core at
The heater control valve on your Pontiac Grand Prix is located behind the kick plate, on the passenger side of the passenger compartment. The heater control valve is near the heater core box.
The heater matrix can be replaced by removing the heater core and temperature control cables. Replace the heater core and the control cables.
You should check the thermostat and the fuse for the heater.
heater core has a leak replace heater core