answersLogoWhite

0

To replace the back spark plugs on a 1987 Pontiac Fiero, first ensure the engine is cool and disconnect the negative battery cable. Access the rear spark plugs by removing the engine cover and any components obstructing them. Use a spark plug socket and ratchet to carefully unscrew the old plugs, then install the new ones, ensuring they're properly gapped. Finally, reconnect everything and the battery cable before starting the engine.

User Avatar

AnswerBot

4mo ago

What else can I help you with?

Related Questions

Spark gap for 1986 Pontiac fiero 6-cylinder se?

.045 inch


What would cause a fuse to spark when you are replacing it in a Pontiac fiero?

There is a load on the circuit. In other words something is turned on and is drawing power. You insert the fuse and will see a slight spark.


Can a oil pressure sending unit cause a 1984 Pontiac fiero from getting fire to the spark plugs?

no but it can stop the fuel pump from running.


How do you change spark plugs on pontiac fiero?

To change the spark plugs on a Pontiac Fiero, first ensure the engine is cool and disconnect the negative battery cable. Remove the spark plug wires, noting their order for reinstallation, and use a spark plug socket to unscrew the old plugs. Inspect the plugs for wear, then install new plugs by hand to avoid cross-threading, and tighten them to the manufacturer’s specifications. Finally, reconnect the spark plug wires and the battery cable.


How do you replace spark plugs on 2006 Pontiac Montana?

One at a time


Where is the spark pulgs located on a 1992 delta 88?

they are in the front by the raderater and in thr back by the fire wall


How to replace the spark plugs on a 1998 Pontiac sunbird 4 cylinder?

they did make a sunbird in 1998!


What is the gap setting on an 85 fiero spark plug?

.045


Explain why diesel engines dont use spark pulgs?

The compression ratio is high enough to combust the diesel without the aid of sparkplugs


How tune up a Pontiac fiero 85?

Your going to want to replace the spark plugs, the wires, the distributor cap and rotor. Check the timing. Replace the air filter. Replace the gas filter if it has more than 50,000 miles on it. Check your belts (2 if you have A/C, 1 if you don't) Check for loose or missing or melted vacuum lines. Check the EGR tube to see if it is cracked and leaking. Replace the ECR valve if over 50,000 miles since its last replacement.


Why might your 1999 Pontiac gran prix be idling at 2000 rpms?

Check you spark plugs. Probably going to need to replace them.


How to replace Pontiac transport spark plug's on 3800?

To replace the spark plugs on a Pontiac Transport with a 3800 engine, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil pack by unscrewing it and carefully lifting it off the spark plugs. Then, use a spark plug socket and ratchet to remove the old spark plugs, and install the new ones by hand tightening them before using the ratchet. Reattach the ignition coil pack and reconnect the battery terminal to complete the process.