0
How do you replace the camshaft position sensor on a 98 Ford Contour 4-cylinderinder?
Simon from Montreal
The camshaft sensor is located at the back of the head on driver side. Remove the wire,unscrew the sensor,screw the new sensor in the head and put the wire back on the sensor.Pretty easy job!
Mike From Des Moines
The camshaft sensor is not in the back on the 98 4 cyl its right in front. All you need to do is take off the 3 bolts on the top of the heat shield and pull it back a bit and it will be right there.
What else can I help you with?
How do you replace replace the camshaft position sensor?
In order to replace the camshaft position sensor, you would need to disconnect the electrical plug holding it in. Using a socket, hold down the bolt and remove the camshaft position sensor.
How do you replace the camshaft position sensor on a 1997 Plymouth voyager 3 L?
how do you replace the camshaft position sensor on a 1997 plymouth voyager 3l
Where is the camshaft position sensor located on a 1999 Oldsmobile Intrigue and how do you replace it?
where is the camshaft position sensor located on a 1999 Oldsmobile intrigue
How do you replace a camshaft position sensor on a 2000 Nissan Xterra?
How do u replace the camshaft sensor for a 2000 Nissan xterra 3.3L and where is its locatoin
P1345 crankshaft position camshaft position correlation?
Replace the crankshaft and camshaft senors and then clear the codes with an oBD II engine scanner and that will fix it.
If you replaced the camshaft position sensor should you replace the crankshaft position?
I changed only the camshaft position sensor on my 2000 Kia Sportage. So I don't think so.
How to replace camshaft position sensor for vw jetta 1999?
how to remplace position of oxigen sensor
Where is the camshaft position sensor on a 2006 Kia Sorento?
do you need to take off the timing belt to replace a camshaft position sensor on a 2006 kia sorento
1997 contour that has a 2.0 zetec in it and it gives me a p1383 code i timed it with no improvement i wanted to know if a bad injector could give this code thanks for any help?
Trouble code P1383 means: Camshaft Position Timing Over Retarded (Bank 1) Replace the camshaft sensor
VW Beetle 2.0 camshaft senors 2001?
Show me how to replace the camshaft position sensor on a 2000 volkswagen new beetle
How do you replace camshaft position sensor on a 2006 Nissan xterra 4.0 v6?
camshaft location on a 06 xterra bank 2
How do you replace the camshaft positioning sensor ml27 cdi?
the camshaft position sensor is on the left side of the engine , at back on the upper side . you have to demont the conector , than unscrew and replace it
