I would suggest you obtain a HAYNES manual from a NAPA store as this is detailed and your personal safety involved due to air bag .
Answer --- Just pry out switch with something like a .020" thick feeler gauge, andunplug it.
Replace the cruise control switch (the one with the orange light in it) The switch is a push on push off. If the little plastic gear inside the switch breaks off the switch will work like a door bell switch and will not latch on.
First you need to troubleshoot the 1994 LeSabre cruise control. Check the fuse, the cruise switch, the linkage, to find where the problem is. Check the vacuum lines on the engine as a vacuum leak can cause the cruise to not work properly.
The P0565 trouble code on a 1994 Buick LeSabre Limited indicates a problem with the cruise control system, specifically related to the cruise control switch or wiring. To repair it, first inspect the cruise control switch for any damage or malfunction. Next, check the wiring and connectors for corrosion or loose connections. If necessary, replace the switch or repair the wiring to resolve the issue. After making repairs, clear the code and test the cruise control system to ensure it functions properly.
The combination turn signal, cruise control, windshield wiper, and headlight dimmer switch simply plugs in. Pull the relay switch out and replace with the new switch.
The Chrysler Sebring cruise control switch is located beneath the dashboard, on the drivers side. The cruise control switch should be labeled as such.
This means that the switch is going bad. You will need to replace the switch that is on your steering wheel or on the turn signal switch.
i need a top cap button for the on-off switch for the cruse control
On most vehicle the brake switch is one way to shut the cruise off.
To replace the cruise control switch on a 1996 Chevrolet Corsica, first, disconnect the negative battery cable to ensure safety. Remove the steering wheel by taking off the retaining nut and using a steering wheel puller if necessary. Once the wheel is off, access the cruise control switch by removing the screws or clips securing it to the steering column. Finally, replace the old switch with the new one, reassemble the steering wheel, and reconnect the battery.
That depends what is wrong with it. The first thing to check would be the brake switch.
Most cars have a switch to disable the cruise control. To permanently disable the cruise, remove the fuse for the circuit.
Change the cruise control switch.