The dimmer switch is located on the bottom of the steering column,just remove 2 bolts and it unplugs from the wiring,very easy to replace. Most auto parts stores sells them for around $15.00 bucks.
Good luck!
how do you replace3 dimmer switch 1987 chevy silverado 4 x 4
dimmer switch is on the turn signal lever, to replace you need to remove steering wheel
The only way to fix the dimmer switch is to replace it I have tried cleaning it lubercating it. nothing will fix it for good .so i had to replace it. It is a factory item.
Im pretty sure after you remove the steering column cover, the switch clips in.
Its pretty easy, as long as you have or have found a new switch. You just have to go to your local Chevy Dealer
To replace the dimmer switch on a 2000 Chevy Metro LSI, first disconnect the negative battery cable to ensure safety. Remove the dashboard cover or panel to access the switch, typically held in place by screws or clips. Disconnect the wiring harness from the old dimmer switch, then remove it from the dashboard. Install the new dimmer switch by reversing the process, reconnecting the wiring, and securing everything back in place.
disassemble steering column,and replace signal arm ass'y
To replace the dimmer switch on a 1993 Chevy Lumina, first disconnect the negative battery cable to ensure safety. Remove the dashboard panel covering the switch, then unscrew and disconnect the old dimmer switch from the wiring harness. Install the new dimmer switch by reversing the process: connect the wiring, secure it with screws, and reattach the dashboard panel. Finally, reconnect the battery and test the new switch.
You have to pull the steering wheel off to get the whole turn signal stat out and replace the whole thing.
To replace the headlamp dimmer switch on a 1998 Chevy Prizm, first disconnect the negative battery terminal to ensure safety. Remove the steering column cover by unscrewing the screws and gently prying it apart. Locate the dimmer switch, disconnect the wiring harness, and unscrew the switch from the column. Install the new switch by reversing the process, reconnecting the wiring, and reattaching the steering column cover.
The headlight switch should be easily removed from the dash. There are two connectors on the back side of the switch (one for the headlights and one for the dimmer). Simply unpug the connectors and plug in the new switch.
The 1985 Chevrolet El Camino ignition switch can be removed by loosening the retaining ring at the top of the switch. The switch will slide out. Remove the wiring harness from the back of the ignition switch.