Had to replace mine not too long ago. You will need a very small screw driver to pry the button loose. Once out you are home free! You can find a diagram on how to do this on Smokinvette.com. Good luck!
My '84 has two; one inside the console storage compartment and one on the back edge of the driver's door; door must be open to see it.
== ==
Gas door is on the deck lid.
REPLACE PASSANGER DOOR LOCK MODULE. SOMETIMES YOU MIGHT NEED BOTH PASSANGER AND DRIVER DOOR LOCK MODULES. THEY ARE ABOUT $250 EACH. YEAH I DID IT IN MINE.
http://www.ecklers.com/assets/pdf/A4301.pdf?
I have a 1984 Corvette and the alarm went off. Is there a switch, key or button that I can turn the alarm off? Thank you! The alarm is reset by inserting the door key into the drivers door and turning the key.
The spring holding the door button in place has fallen out. Remove the door handle and replace.
Remove all the screws, take the arm rest off, and lift.
Fuel door release button/switch.
No, the door release button will not wear out quickly. The button is far more convenient compared to traditional pull handle model.
On my '95 Bonneville the trunk release button is on the driver's door below the door handle. Hope this helps.
The intercom buzzer with door release button in a security system allows communication between someone outside a building and someone inside. When the buzzer is pressed, a signal is sent to the person inside to let them know someone is at the door. The door release button can then be pressed to unlock the door and allow entry.