To replace the headlight assembly on a 2002 Dodge Neon (commonly referred to as the "Laser" in some markets), first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; remove the screws or clips securing it in place. Disconnect the wiring harness from the back of the assembly, then carefully remove the old assembly. Install the new assembly by reconnecting the wiring harness and securing it with the screws or clips, then close the hood and test the headlights.
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
By removing the locks that hold the headlight assembly in place you can wiggle the headlight assembly out to gain access to the headlight bulbs for replacement.
You don't. Instead, you replace the entire assembly.
To replace the headlight on a 2002 Buick LeSabre, first, open the hood and locate the headlight assembly. Remove the retaining clips or screws that secure the assembly, then pull it out gently. Disconnect the wiring harness from the back of the bulb, replace the old bulb with a new one, and reconnect the wiring. Finally, reinsert the headlight assembly and secure it with the clips or screws.
To replace the headlight on a 2002 Mazda Tribute, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, then gently pull it out. Disconnect the electrical connector from the back of the headlight bulb, twist the old bulb counterclockwise to remove it, and install the new bulb by twisting it clockwise. Reconnect the electrical connector and reattach the headlight assembly, securing it with the screws or clips.
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
Need instructions please on replacing left side headlight assembly to 2002 Ford Mustang
See *Headlight* under Maintenance and Service - Replacing Bulbs, in your "Owner's Manual" (Removing the Headlight Housing Assembly makes life a lot easier).....
My daughter has a 2002, and you must take it to the dealer, so we were told.
To change the headlight on a 2002 Suzuki Aerio, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it off. Remove the retaining clips or screws holding the headlight assembly in place, then gently pull the assembly out. Replace the burnt-out bulb by twisting it counterclockwise, inserting the new bulb, and reassembling everything in reverse order.
To replace the driver side headlight bulb in a 2002 Cabrio, first, open the hood and locate the headlight assembly. Disconnect the wiring harness by squeezing the tab and pulling it off. Remove the rubber dust cover, then twist and pull the old bulb out of the assembly. Insert the new bulb, ensuring not to touch the glass, replace the dust cover, and reconnect the wiring harness.
To replace the headlight unit on a 2002 Audi TT, first, open the hood and locate the headlight assembly. Disconnect the electrical connector and remove the screws or bolts securing the headlight unit in place. Carefully pull the old headlight out and replace it with the new unit, ensuring all connections are secure. Finally, reattach any screws or bolts and test the new headlight before closing the hood.