How do you replace the ignition key switch in a 1995 Ford F-150?

Answer 1

1)Insert the key and turn it to the RUN position. Do not start. 2)Insert a 1/8" drill in a hole in the trim shroud below the ignition key. 3)There is a retaining pin in the hole. Push upward and you will depress the retaining pin. 4)As you push on the retaining pin, pull out the ignition key switch from the steering column. 5)When reinstalling, turn the ignition key switch to the RUN position and depress the retaining pin with your finger. 6)Insert the ignition key switch into the steering column. 7) Make sure the ignition key switch is seated and aligned before you turn the key to OFF. This will let the retaining pin extend into the hole. 8)Test to make sure the key goes to all the positions.