0
I did it on an IS 200, 2000. Remove boot lid (trunk lid) lining. Remove 4 8mm nuts that are in a row about 20 inches long behind the lights. Two of them hold the key lock in place. There are two white plastic locators in behind the metal protecting the lights.Use a screwdriver to pop them as you pull plastic trim surrounding the lights and lock from the other side.
The left side light can be popped out with a screwdriver from the left hand side. Rotate bulb holder anti clockwise. Its a 5w capless bulb.
What else can I help you with?
How do you change the license plate bulbs in a Lexus RX 350?
To change the license plate bulbs in a Lexus RX 350, start by opening the rear hatch and locating the license plate lamp assembly. Use a flathead screwdriver or a similar tool to gently pry the assembly out of its housing. Once removed, twist the bulb socket counterclockwise to release it, then replace the old bulb with a new one. Finally, reassemble the lamp by inserting the socket back into the assembly, securing it in place, and testing the new bulbs.
How do you replace the license plate bulb on a 2005 Lexus RX330?
Ask your car dealer...
How do you replace a license plate bulb on a 2005 grand prix?
Open your trunk the two inner bulbs are for your license plate twist and should pop right out
How do you replace the license plate bulbs on a 1998 Chevy Blazer?
push up and turn on the housing
How do you replace license plate bulb on 2008 Pontiac G8?
You need to remove the liner on the trunk lid. That will give you access to the license plate lights housing. Remove the sockets by twisting 1/4 turn and replace bulbs. Size for bulbs are 2825
How do you Replace license plate bulb on a Lexus LX 470?
Open the rear hatch and remove the inside trim on the lower portion of the hatch. The bulbs will be accessible once the trim is removed. The bulb sockets are twist in.
How do you replace the license plate bulbs on a Honda Pilot?
The clear covers for the license plate light bulbs have small arrows pointing in one direction. Simply push the cover to the direction of the arrows and the covers will slide off allowing for the old light bulbs to be replaced.
How do you replace one of the rear license plate bulbs on a 2002 Buick Regal?
OPEN THE TRUNK LID. JUST INSIDE THE LID BEHIND THE LICENSE BULB CASE ARE 2 PHILIP HEAD SCREWS THAT REMOVE THE BACKING PLATE. ONCE YOU REMOVE IT YOU CAN REPLACE BOTH LITTLE BULBS. THEN PUT THE PLATE AND SCREWS BACK IN YOUR READY TO GO.....
How do you replAce license plate bulbs on 1998 buick lesabre?
If you can not remove fasteners on outside, you may need to cut a section out of the inside of trunk to get your hand by the bulbs.
How do you change the license plate light bulb on your 93 Lexus es 300?
How do I change the license plate bulb on a 1993 Lexus ES 300
How do you replace license plate bulbs 2002 miata?
To replace the license plate bulbs on a 2002 Mazda Miata, first, open the trunk and locate the license plate light assembly on the rear of the car. Use a flathead screwdriver to gently pry off the light cover. Once the cover is removed, twist the old bulb counterclockwise to remove it, then insert the new bulb by twisting it clockwise until secure. Finally, reattach the light cover and test the new bulbs to ensure they are working.
How do you replace license plate bulbs on 1998 cheve blazer?
To replace the license plate bulbs on a 1998 Chevrolet Blazer, first, open the rear hatch and locate the license plate light assembly. Use a flathead screwdriver to gently pry off the light lens cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb by twisting it clockwise into the socket. Finally, snap the lens cover back into place and check that the new bulbs are functioning properly.
