To replace the rear quarter panel on a 1998 Chevrolet Malibu, start by removing any trim and accessories that obstruct access, including the interior panel and rear lights. Cut away the damaged quarter panel carefully using a body saw or cut-off wheel, then prepare the area by cleaning and priming the edges. Align the new quarter panel, securing it with spot welds or adhesive as needed, and finish by reassembling the interior and exterior components. Finally, paint the new panel to match the vehicle.
Begin by removing the front quarter panel retaining bolts. The front quarter panel's will come off. Reverse the process to install your new front quarter panels.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
The 2004 Chevrolet Malibu coolant sensor float is located in the radiator. The coolant sensor float replace the level of coolant to the instrument panel.
The 2005 Chevrolet Malibu OBD 2 port is under driver side next to kick panel
If there is an access panel, yes. If not you will have to remove the tank.
look in your fuse panel for a fuse labeled HORN..pull it out and see if it is blown (broken)
http://www.ecoutez.net/boxster/door-panel-removal/panel-clip-removal-1.jpg
you have to take the whole door panel off and get to it form that way
Check the panel lights resistor switch and be sure that they are not turned off.
The rheostat for dimming and brightening the dash lights.
You will need to remove the door panel and see if the motor and/or the regulator is bad.
on top of door panel behind the mirror. remove the plastic cover by prying it off. remove the mirror nuts, and then remove mirror. if it has mirror adjustment cables on it. just remove these cables, and put on with new mirror if needed.