How to replace the power steering depends on which component you wish to replace. Let us know what it is and we will get back to you.
To replace the ignition switch on a 2004 Chevrolet Avalanche, first disconnect the negative battery cable to prevent electrical shorts. Remove the steering column covers by unscrewing the screws, then locate the ignition switch, which is typically mounted on the steering column. Disconnect the wiring harness from the old switch, remove the screws holding it in place, and install the new switch by reversing the process. Finally, reassemble the steering column covers and reconnect the battery.
replace it
To replace the switches on a 2001 Ford Explorer Sport Trac steering wheel, start by disconnecting the battery to ensure safety. Remove the airbag by unscrewing the retaining screws from the back of the steering wheel, then carefully detach the airbag connector. After removing the airbag, unscrew the steering wheel using a steering wheel puller, which will allow access to the switch assembly. Finally, disconnect the old switches, replace them with new ones, and reassemble everything in reverse order.
You can get the pump for about $80
replace the steering column.
easiest option is to replace the steering column there all over junkyards with perfect switches in them
It is cheaper to replace it with a remanufactored pump.
It will cost approximately $225 to replace a CV joint in your Chevrolet Avalanche. The CV joint will cost approximately $80 and require two hours of labor.
Remove the covers from your 2003 Chevrolet Avalanche speakers. Remove the speaker retaining screws. Remove the wiring harness from the back of the speakers. Reverse the process to install the new speakers.
Replace serpentine belt on Chevy avalanche?HOW
http://www.gmtruckclub.com/forum/showthread.php?t=10354