0
To replace the thermostat on a 1997 Chrysler LHS, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose to access the thermostat housing. Unbolt the housing, take out the old thermostat, and clean the mating surfaces before installing the new thermostat with a new gasket. Reassemble everything, refill the coolant, and reconnect the battery.
What else can I help you with?
Is the thermostat spring on a Chrysler lhs 1997 pointing up or down?
The spring goes into the engine block.
Is there a diagram of the 1999 Chrysler lhs engine?
Where is the thermostat located at on a 1999 lhs
Which cars have the same motor as a 1997 Chrysler lhs?
1996-1997 Dodge Intrepid, Chrysler Concorde, Chrysler LHS, Eagle Vision.
How do you replace the thermostat in a Chrysler lhs?
To replace the thermostat in a Chrysler LHS, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose to access the thermostat housing. Unscrew the housing, take out the old thermostat, and clean the mating surfaces before installing the new thermostat with a new gasket. Finally, reassemble everything, refill the coolant, and check for leaks.
What a motor that will replace 3.5 Chrysler LHS 1996 what car year will do this?
1996 or 1997 3.5 only
Is there an emergency switch for the fuel pump on a 1997 Chrysler lhs?
A Chrysler LHS does not have an inertia or reset switch.
Where is the oxygen sensor on a 1997 Chrysler LHS?
There are four oxygen sensors on the 1997 Chrysler LHS. 2 before the catalytic converter and 2 after.
How do I replace an AC belt on a 1999 Chrysler LHS?
will chrysler lhs not run wen ac belt is broken
How do you replace a camshaft sensor on a 1995 Chrysler LHS?
if it is a 3.5 like mine it is located right next to the thermostat and a 10mm wrench and 5 minutes
What might cause 1997 Chrysler LHS 3.5 Engine to run hot?
water pump, thermostat broken fans, clogged radiator, broken hoses
How do you change a thermostat in a Chrysler LHS?
To change the thermostat in a Chrysler LHS, first ensure the engine is cool, then disconnect the negative battery cable. Drain the coolant from the radiator and remove the upper radiator hose connected to the thermostat housing. Unscrew the thermostat housing and replace the old thermostat with the new one, ensuring the rubber gasket is in place. Reassemble the housing, reconnect the hose, refill the coolant, and finally reconnect the battery cable.
How do you replace an air conditioner belt on a 1999 Chrysler lhs?
To replace an air conditioner belt on a 1999 Chrysler LHS, rote the the new belt through the pulleys within the engine of your Chrysler vehicle.
