Overhaul your engine, engine intake and exhaust systems.
It is on because the ECU has detected a problem with the emissions system. Take it to a professional for repair of the problem. He will reset the light after the repair.It is on because the ECU has detected a problem with the emissions system. Take it to a professional for repair of the problem. He will reset the light after the repair.
No such thing. If you reset the computer, the emissions testers will see that you've done a reset and that's an automatic fail
No
use a scan tool even a basic one from autozone if you know the guy working there he can reset it on the scan tool, you can disconnect the battery for 2 days. when i had mine unplugged doing some motor work, I had to drive around to pass emissions pcm had reset so i could pass the emissions test. hope this helps.
Your ECM has deteced a problem with the emissions system. The light can be reset after the problem is repaired. You need an OBD2 scan tool to reset the light.
Varies, a couple of weeks should be enough.
By having the problem repaired and the light reset with an OBD2 scan tool. Pre 1996 remove the negative battery cable for 5 minutes.
If the Check Engine light is on then there is a problem with the emissions system. Once that is repaired the light can be reset. Reset it without repairing the problem and it will just come back on.
This is an emissions related problem. Certain emissions components are warrantied for 8 years and 80,000 miles. Return it to the dealer for repair. Your owner's manual will tell you what your warranty rights are. You reset the light with an OBD2 scanner, after the problem has been corrected.
I had to turn my key to the second click and floor the gas pedal (without the engine on)
well there is two ways one you can do is take your battery cables off and leave them for 5mins other option is to go to autozone and they will reset your codes for free
The check engine light does not come on when an oil change is due. The check engine light is for an emissions related failure. It is reset with a scan tool after the fault is repaired.