Turn ignition on but do not start engine, depress accelerator to the floor three times within 5 seconds, oil change light should flash 5 times, oil change light is reset if you did this correctly.
The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.
Turn the ignition on but don't start the car, press the accelerator rapidly 3 times in less than 5 seconds, if you do it correctly, the change oil light will be reset, if it does not work, try it again until it does. I have used this on both of my wife's lumina's (both a '98, and a 2000) as well as my '96 Caprice.
Reset the change oil light on Mazda 3
Your owners manual should tell you how to reset the light.
how do you reset change the oil light in a 2004 alero?
To reset "CHANGE OIL SOON" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator 3 times within 5 seconds. The light will blink and go out... RDavis Cola, SC
i unhooked the battery...(both terminals)
Ignition key to run position, "engine off" pump throttle 3 times within 5 seconds CHG OIL SOON light flashes 2 times system is reset
Per the owners manual,turn the ignition key to the RUN position (but don't start the engine) fully push and release the accelerator pedal three times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. If the light comes back on and stays on, repeat the reset process.
Disconet the battery for 15 minutes this will reset your oil change light
Your owners manual should tell you how to reset the light.
== == how do you reset the oil light on a1992 corvette