To reset the security system on a 2004 Pontiac Aztek, first, ensure you have the vehicle's key or remote. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off, then turn the key to the "Off" position and back to "On" again. This process should reset the security system, allowing you to start the vehicle.
The only thing you need to reset is the clock and radio station presets.
how to reset security system on ford explorer 2004
To reset the security code on a 2002 Pontiac Aztek, first, disconnect the vehicle's battery for about 10 minutes to reset the system. Reconnect the battery, then turn the ignition to the "On" position without starting the engine. Wait for about 10 minutes until the security light turns off, then turn off the ignition and restart the vehicle. If you have the original key, it may also help to use it to start the engine after the reset.
To reset the security light on a Pontiac Aztek, first ensure that the vehicle's ignition is in the "On" position without starting the engine. Then, disconnect the battery for about 10 minutes to reset the system. After reconnecting the battery, turn the ignition back to the "On" position for a few seconds without starting the engine, then attempt to start the vehicle. If the security light remains on, you may need to consult the owner's manual for additional troubleshooting steps or consider seeking professional assistance.
I dont belive the aztek has one think only fords have those
Unlock the door with the key or the remote.
unplug the battery for 15- 20 mins it should reset it i think
Read you owner's manual.
my 2004 aztek has an 18 gallon tank
to reset the computor..all you have to do is take the negative battery cable off for about 10 min. then tighten back on. tada!
To reset the radio in your 2004 GMC Envoy after replacing the battery, first, turn on the ignition without starting the engine. Then, turn on the radio; if it shows "LOCKED" or "SECURITY," you may need to enter a security code. If you don't have the code, check your owner’s manual or contact a dealership. Once entered, the radio should reset and function normally.
To reset the security system on a 2004 Jeep Grand Cherokee Laredo, first ensure the vehicle is in the "Off" position. Then, insert the key into the ignition and turn it to the "On" position without starting the engine. Wait for about 10 minutes until the security light stops flashing, then turn the key back to "Off" and remove it. This should reset the system, allowing you to start the vehicle normally.